Customer Helpline
1300 889 028
12
Operating Instructions
ASSEMBLY
1. INSTALLING AND REMOVING THE BATTERY PACK (NOT SUPPLIED)
a) TO REMOVE THE BATTERY PACK (SEE FIG B1)
Depress the battery pack release button firmly first and then slide the battery pack out
from your tool.
b) TO INSTALL THE BATTERY PACK (SEE FIG B2)
Slide the fully charged battery pack onto the tool with sufficient force until it clicks into
position.
2. TO INSTALL OR REMOVE SOCKET ON THE TOOL HOLDER (SEE FIG. C1, C2)
To install the socket (not supplied), insert the socket onto the tool holder.
To remove the socket, pull the socket out of the tool holder.
WARNING: Inspect tool holders and socket carefully before using the tool.
Missing or damaged items should be replaced. Make sure the switch is
locked off or remove the battery pack before changing accessories.
B1
C1
B2
C2
