background image

Customer Helpline

 1300 889 028

7

Safety Information 

Important

 - Please read these instructions fully before starting assembly

WARNING

Read all safety warnings and all instructions. 

Failure to follow the 

warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

-   This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning use of the appliance by a 
person responsible for their safety. 

-   Children should be supervised to ensure that they do not play with the appliance.
  If the supply cord is damaged, it must be replaced by the manufacturer, its service 

agent or similarly qualified persons in order to avoid a hazard.

Additional safety instructions for your Battery Charger

1.  Before charging, read the instructions.
2.  For charge 1.5Ah/2.0Ah battery pack only.
3.  Do not charge a leaking battery.
4.  Do not use chargers for works other than those for which they are designed.
5.  Before charging, ensure your charger is matching the local AC supply.
6.  The charging device must be protected from moisture.
7.  Do not use the charging device in the open.
8.  Do not short out the contacts of battery or charger.
9.  Respect the polarity “+/-“ when charging.
10. Do not open the unit and keep out of the reach of children. 
11. Do not charge the batteries of other manufactures or ill-suited models.
12. Ensure that the connection between the battery charger and battery is correctly 

positioned and is not obstructed by foreign bodies.

13. Keep battery charger’s slots are free of foreign objects and protect against dirt and 

humidity. Store in a dry and frost-free place.

14. When charging batteries, ensure that the battery charger is in a well-ventilated area 

and away from inflammable materials. Batteries can get hot during charging. Do not 
overcharge any batteries. Ensure that batteries and chargers are not left unsupervised 
during charging. 

15. Do not recharge non-rechargeable batteries, as they can overheat and break.
16. Longer life and better performance can be obtained if the battery pack is charged when 

the air temperature is between 18

o

C and 24

o

C. Do not charge the battery pack in air 

temperatures below 4.5

o

C, or above 40.5

o

C. This is important as it can prevent serious 

damage to the battery pack.

17. Charge only battery pack of the same model provided by POSITEC and of models 

recommended by POSITEC

General Safety Warnings

Summary of Contents for CPS18LD.9

















Reviews: