Blade depth and bevel adjusting locking levers must be tight and secure
before making cut.
If blade adjustment shifts while cutting, it will cause binding
and kickback.
Use extra caution when making a “Pocket Cut” into existing walls or other
blind areas.
The protruding blade may cut objects that can cause kickback.
11.
Always wear ANSI-approved safety impact eye goggles and heavy work
gloves when using the Circular Saw.
Using personal safety devices reduces
the risk of injury.
12.
Always connect the Line Cord to a Ground protected electrical outlet
.
WARNING! People with pacemakers should consult their physician(s) before
using this product.
Electromagnetic fields in close proximity to a heart
pacemaker could cause interference to or failure of the pacemaker. In addition,
people with pacemakers should adhere to the following:
Avoid operating power tools alone.
Don’t use a power tool with the power switch locked on.
Be certain that the tool is properly grounded. A ground fault interrupt (GFCI)
system is also a good precaution. This inexpensive device is a good safety
measure because it prevents a sustained electrical shock.
Properly maintain and inspect all tools before use to avoid electrical shock.
Circular Saw
Rated Input: 10 Amp
No-load Speed: 5800/min
Cutting capacity @ 90°: 2-7/16”
@ 45°1-13/16”
Includes:
1 saw blade
1 wrench
1.
Saw Blade
2.
Blade Cover
3.
Base Plate
4.
Lower Guard Lever
5.
Dust Extraction Chute
6.
Blade Guard
7.
Rear Handle
8.
Front Handle
9.
Brush Cap
10. Bevel Scale Bracket
11. Angle Adjust Wing Nut
12. Hex Screw
13. Lock-Off Button
14. Trigger Switch
15. Depth Guide Bracket
16. Depth Lever
17. Spindle Lock
5
KNOWING YOUR CIRCULAR SAW
SPECIFICATIONS
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool or
product. Never remove the grounding prong from the plug. Do not use the tool if
the power cord or plug is damaged. If damaged, have it repaired by a service
facility before use. If the plug will not fit the outlet, have a proper outlet installed
by a qualified electrician.
SAFETY INSTRUCTIONS FOR CIRCULAR SAWS
17
13
7
6
14
8
5
9
15
16
4
10
11
12
2
1
3
