2
Before Connecting to the power
Before use, check if the rated voltage and rated frequency is in line with the local power supply,
to avoid damage the fan motor. Grounding screw should have good grounding.
Important for Safe Operation
Strictly prohibited to function in conductive dust or flammable, explosive or high humidity corrosive gases
in the environment.
Before shifting position of fans, power supply must be cut off, and blade in static position.
For maximum air flow avoid placing fan near curtains or in confined spaces and corners.
To avoid the risk of electrical shock, do not handle any part of the fan, cord nor plug with wet hands.
To prevent personal harm and/or damage to personal property, do not insert fingers, hands or any other
object into the fan cover while in operation.
Fan pitch adjustment
The angle of the fan can be set from the button on the side to direct the air in the desired direction.
Speed regulation
The fan offers four operating speeds that can be changed with the speed adjustment button:
File 0 – Stop
File 1 –Low speed
File 2 – Medium speed
File 3 –High speed
CLEANING
WARNING: Unplug from electrical supply source before cleaning. After servicing, any safety device (including grilles and
blades) must be reinstalled or remounted as previously installed. Use soft damp cloth then with dry cloth. Do not use
harmful cleaners. Do not bend the blades.
DO NOT IMMERSE THE MOTOR IN WATER.
Technical parameters
180W
60 Hz
120V
Parts
BLADE
COVER
STENT
PITCH ADJUSTMENT
