02
Hardware Installation
Note: Images are for example only. Actual
positions of switches or connectors and
pieces may vary depending on the model.
1. Push and slide the cover to open the
external encrypted enclosure
2. Insert the hard drive into the external
encrypted enclosure carefully.
Caution: Do not touch the chipset on the
PCB or the guarantee will be void.
3. If a HDD with 7.0mm thickness will be
installed, please stick the rubber sticker in the
position indicated. This rubber sticker is for
keeping the 7.0mm HDD in its position. Please
do not stick the rubber sticker when install a
9.5mm HDD.
Micro USB 3.0 Port