Step 5
1. Fix 2 x Guide Rods (
8
) to the right Base Frame (
2
) using 2 x M10×25mm Allen Bolts (
43
).
2. Put the Guide Rod (
8
) through 1 x Rubber Bumper (
28
), 1 x Shock Spring (
27
) and 1 x Rubber
Bumper (
28
) sequentially.
3. Put the Guide Rod (
8
) through 15
×
5kg Selector Stems (
29
).
4. Respectively put 2 x Weight Stem Guiding Sleeve (
31
) into the 4kg Selector Stem (
30
), insert the
Selector Rod (
22
) into the 4kg Selector Stem (
30
), screw 2 x M10×25mm Allen Bolts (
36
) in the 4kg
Selector Stem (
30
) and fix the Selector Rod (
22
).
5. Put the Guide Rod (
8
) through 1 x 4kg Selector Stem (
30
).
6. Stick the weight sticker (
32
) as shown in the diagram, from top to bottom sticking 5kg, 10kg, 15kg,
20kg, 25kg, 30kg, 35kg, 40kg, 45kg, 50kg
，
55kg
，
60kg
，
65kg
，
70kg
，
75kg
，
80kg.
12
Summary of Contents for CSX3000
