7
FIG.1
ASSEMBLY INSTRUCTION:
1.PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above
of this instruction sheet you will find an explosion drawing with all single parts (marked
with numbers) which this item consists of.
2.ASSEMBLY INSTRUCTION:
:
FIG.2
FI G.2:
Slide the Vertical Seat Post (pt.10) into the
seat post housing on the main frame
(pt.16). Then slide the Seat Post (pt.12)
into the Vertical Seat Post (pt.10),then
Secure using a flat washer (25) and
Shape knob (26).
Secure the saddle in
position with the Adjustment Knob (30). The
correct height for the seat can be adjusted
after the bike is fully assembled.
Now fix the Seat (pt.13) to the Seat Post
(pt.12) as shown, and tighten the bolts
around the screws under the seat.
FIG.1:
Attach the Front Stabilizer (pt.15) to the
Main Frame (pt.16) using two sets of Ø10
Flat Washers (pt.5), M10*30 Carriage
bolt (3).
Attach the Rear Stabilizer (pt.4) to the
Main Frame (pt.16) using two sets of Ø10
Flat Washers (pt.5), M10*30 Carriage
bolt (3).
