18
B
B
E
E
L
L
T
T
A
A
D
D
J
J
U
U
S
S
T
T
M
M
E
E
N
N
T
T
Place treadmill on a level surface. Make treadmill run at approximately 6-8 km/h, observe the running
belt deviate condition.
If the belt has drifted to the right, unplug the
safety lock and power switch, and turn the right
adjusting bolt 1/4 turn clockwise, then insert the
power switch and safety lock, make the treadmill
running, observe the running belt deviate
condition. Repeat above steps until the running
belt be placed in the middle. See picture A
Once the treadmill belt swerving to the left,
unplug the safety lock, turn off the power, then
with the left adjusting bolt clockwise rotation 1 / 4
laps, and turn on the safety lock and power to
make treadmill running, checking the deviation
of the treadmill belt. Repeat the above steps until
the belt centered.
See picture B
The treadmill belt will gradually relax after above
steps or after a period of time using, unplug the
safety lock, and turn off the power, with the two
adjusting bolt clockwise rotation 1 / 4 laps, and
turn on the safety lock and power to make
treadmill running, then standing on the belt to
confirm the tightness. Repeat the above steps
until the belt moderate tightness.
See picture C
