33
MAINTENANCE
The ECO-ClimaTEC does not require any maintenance at short
terms.
Basic maintenance on system components on long terms:
1.
Make sure the liquid level in the reservoir is correct (see
chapter
'filling'
for more information.
2.
Make sure there is no contamination in the liquid.
If there is contamination than refill the reservoirs.
3.
Observe if the liquid flow is clear of air bubbles.
4.
Before refilling the reservoirs, make sure the filter in the
fill opening is clear of contamination, to prevent the ECO-
ClimaTEC from running on contaminated cooling fluid.
Replace or clean the filter if it is not clean.
5.
The radiator and fan must be cleaned when polluted.
6.
When airfilters are used, these must be cleaned or
exchanged when they are polluted.
7.
Do regularly control the electric connections and tighten
them if they are loose.
8.
Do regularly check the condition of the liquid tubes and
couplings. If they are internally contaminated they can
hold back the performance of the ECO-ClimaTEC. Replace
them if necessary.
9.
When the ECO-ClimaTEC is polluted, clean the outer
surface with a water soaked cloth.
