Pairing
“Bluetooth® Pairing” is a technical term in Bluetooth® Technology that means; two or
more Bluetooth® devices can interface with one another wireless.
1.
Make sure the PRIME STEREO Headset is off.
2.
Press “Multifunction Button” for 7 seconds until the “Status LED” flashes red and
blue alternately.
3.
Follow the operating instruction of your Bluetooth® device and put the device in
“search mode”. Normally, this is done by going to the “Set up” menu and selecting
“Connect” or “Bluetooth®”. Select the option to search for Bluetooth® devices and
follow the devices instructions.
4.
The device will find the PRIME STEREO Headset and ask if you want to connect with
the headset. Press “Yes” or “Confirm” to confirm this action.
3.
If the device asks you to enter a password, enter PIN “0000” and press “Yes” or
“Confirm”. (Important notice: If the connection is successful, the “Status LED” will
flash blue. If the pairing is unsuccessful, the “Status LED” will continue to flash
alternately red and blue.
Calls
Answering / Ending Calls
1.
Click “Multifunction Button” one time to answer an incoming call.
2.
Click “Multifunction Button” one time to end current call.
Rejecting a Call
1.
Press “Multifunction Button” for 2 seconds and release after hearing two beeps.
Voice Dialing
1.
Voice dialing: in standby mode, press “Multifunction Button” momentarily, wait
until you hear two quick beeps and speak clearly. Note: Voice dialing depends on
your cell phone.
Redialing
1.
Redialing last outgoing call, in standby mode, double click “Multifunction Button”.
