Top Global USA. ----MB6000 User Guide
- 19 -
Serial Speed
：
When you need a backup link (for example, the v.90 modem) for
MB6000, you might need to configure the serial speed for the modem. There are
totally 6 options for the serial speed (bps): 115200, 57600, 38400, 19200, 9600, and
4800. You may need to reference to the user guide of the modem to configure the
right speed.
ALG plugin
：
This technique relies on the installation of a new, enhanced
Firewall/NAT - called an Application Layer Gateway. MB6000 provides two kinds of
ALG plugin names SIP and H.323. When you choose either, you can plug the
protocol.
Username:
U
sername for MB6000‟s web administration. The default username is
public.
Password:
P
assword for MB6000‟s web administration. The default password is
public.
WebGUI Protocol:
The protocol web configuration used. HTTP is the only Current
choice.
WebGUI port:
The service port for HTTP. User normally need not modify this value.
If you want to
allow someone else to manage the MB6000 from WAN, you can check
Enable management from WAN, and modify the port value according to your needs.
Note:
I sugg
est to change it to: Submit doesn‟t mean saving the configuration
information. User must reboot the system, and then the configuration will be
saved. So if user saves the configuration, and doesn‟t reboot the device through
web page, the configuration information will be lost.
Normally, MB6000 can‟t be configured through WAN interface because of security and
other concerns. If user wishes to remotely configure the MB6000 through WAN interface,
there is one box to select to enable this feature.
Note:
