Top Global USA. ----MB6000 User Guide
- 40 -
Allow
: Indicates only allow the stations which have the MAC addresses listed in the table
to access the MB6000;
Deny:
Indicate only deny the stations which have the MAC addresses listed in the table to
access the MB6000;
Stations connected:
In order to add the ACL conveniently, the MAC addresses of
stations which have been already connected to MB6000 appear in this domain. Click the
Refresh
button, this list will be updated.
Access Control List:
The MAC addresses of stations which have been allowed or denied
to connect to MB6000 are saved in this list box.
There are 2 methods to input the MAC address: one is to select the station item in the
Station Connected list, then click
Add
; the other is to input the station MAC address
through MAC address edit box on the page (below the ACL), the input MAC address
format must be XX:XX:XX:XX:XX:XX.
Note:
Don‟t forget to click
Save
button to save the settings.
3.4.3 Services
There are two main categories in this setting:
Dynamic DNS
DHCP
