Top Global USA. ----MB9000 User Guide
is also an option to guarantee the security of the wireless network. This page configuration
is used to set the station connection control to assure the wireless network security. This
access control scheme is only valid to Wi-Fi client.
Detailed configurations
Access Control Mode:
MB9000 supports 2 types of access control modes:
Allow only
: Indicates only allow the stations which MAC address listed in the table to
associate with the MB9000;
Deny only:
Indicates only deny the stations which MAC address listed in the table to
associate with the MB9000;
Access Control List:
The MAC addresses of stations which have been allowed or denied
to connect to MB9000 are saved in this list box.
Click
to add a MAC address assignment rule, and click
to edit, and click
to
delete an entry. The input MAC address format must be “XX:XX:XX:XX:XX:XX”.
3.4.2.3 WAN
MB9000 provides two PC card slots for Internet connection: the cellular wireless Internet
connection marked with WAN0 and WAN1. You can use each of them to configure your
Internet connection. Click
WAN#0
/
WAN#1
to
enter its WAN configuration page.
Figure 3-19
Wireless Internet access
3.4.2.3.1 Using either WAN0 or WAN1
You can use either WAN0 or WAN1 for the Internet connection. The parameters on their
configuration pages are the same. Using WAN0 for example:
- 26 -
