Top Global USA. ----MB9000 User Guide
3.4.3.3 Route
3.4.3.3.1 Static Route
MB9000 supports user defined static route. Figure 3-27 shows a sample static route
status.
Figure 3-27 Static Route
To add a static route rule, you just need to click the “Add” button and then you will see a
pop-up window show as figure 3-28. You can also set the rules status to enable or disable
by check the box of “Enable”. Or edit the content of a rule entry by click
, as well as
delete it by click
. After you added one or more entries, or made any changes on the
existed entries, you will need to click the “Apply Changes” button to take them effect and
reboot from the reboot page to save the settings to flash.
Figure 3-28 Static Route
To add a new entry, this pop-up window will appear. The
Interface
is to tell the router
through which interface should the outgoing packets go for the specified destination.
There are totally 6 options: LANGroup0, LANGroup1, LANGroup2, LANGroup3, WAN0,
- 34 -
