2
1.Assembly of the main landing gear.
Take of main wings & left and right landing gear &
PWA2*8MM screws from the box. Install the landing
gear to the assembling groove at the bottom of main
wings (Do not invert the left and right landing gear),
then lock the main landing gear by screws (PWA2*8MM)
.
2.Assembly of the main wings.
Take of the fuselage& KM4*45MM screws.
Connect aileron servo wires, and install the main
wings to the right place of fuselage. Then lock
the main wings by screws (KM4*45MM).
3
．
Assembly of the tail wings.
Take of the horizontal wings and install it to fuselage,
please make sure that the horizontal wing should be
assembled to right place completely.
Assemble processes(
)
A1 SKY RAIDER
Main specifications
Main configuration
★
Wingspan 800mm
★
Length 625mm
★
Weight 435g
★
Thrust
≥
450
g
★
Flying time
≥
5min
800mm
678mm
455g
≥
450
g
≥
5min
★
Radio system 4ch
★
Motor
★
Battery 800mAh 11.1V 15C
★
ESC 20A brushless
★
Servo 9gX4
DST-820KV
4ch
800mAh 11.1V 15C
20A brushless
9gX4
DST-820KV
A1 SKY RAIDER
HAWKER TEMPEST
A1 SKY RAIDER
HAWKER TEMPEST
4
．
Assembly of the rocker arm.
Connect the rocker of rudder and elevator; make sure
the collet is at the outermost hole on servo arm.
5. Assembly of the scaled parts.
Take of the guide missile & bomb & auxiliary oil tank. Please classify the guide missile and bomb by left
and right(left parts with number“L”). Then install them to the appropriate place of main wings by EPO glue.
