3
安装步骤
3. Assemble the horizontal wing &vertical wing
Take of the horizontal wing&vertical wing&screwdriver &fixed screw(PA3*22MM) from the box. Please assemble the
horizontal wing as per the following pictures. The elevator surface should be faced down,and please make sure that
the wooden board should be inserted to the installment slot in the middle of the fuselage ,the hole location of the
board should be matched with the backside of the fuselage, then please lock it by the PA3*22MM screw. Take of the
vertical wing and insert the tail wing steel wire into the plastic hole,then please assemble it to the hinge of the
fuselage .At last, please connect the control steel wire collet.
Assemble processes
4. Assemble the main wings
Take of the main wings& wing locking part&locking screw(KM4*55MM)&screwdriver from the box. Please connect
the ESC &receiver &aileron servo wire, then please assemble the main wings to the fuselage and lock it.
