7
Front Panel & Rear Panel of KS 116:
Monitor
Daisy-chain in
Monitor
Keyboard
Console por t
Keyboard
Mouse
Mouse
Computer 8
Computer 16
Computer 7
Computer 15
Computer 6
Computer 14
Computer 5
Computer 13
Computer 4
Computer 12
Computer 3
Computer 11
Computer 2
Computer 10
Computer 1
Computer 9
DC 12V
Made in Taiwan
Power On
16 Por ts
With O.S.D
KVM Switch
Top View
Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned off.
1. Connect the Keyboard, VGA, Mouse cables to the computer ports of KVM switch
2. Connect the Keyboard, VGA monitor, and Mouse to the console port of KVM switch
3. After Powering on computers and finishing the boot-up process, you can start to go KVM switch.
Note:
Please don’t switch the PC port (i.e. Don’t press the push button of KVM switch or run hot key) during the
computers are under boot-up process.
Usage
The power on state of 4/8/16 port KVM switch:
When you power on KVM switch, it will ask you the password,
the default password value is eight
zero –“ 00000000 “
. Please key in eight zero and enter the same value at retype field.
Note:
Before you are not familiar with the operation of OSD manual, please don’t change the password – i.e.
keep default eight zero (00000000) value. Otherwise, if you have set the password and unfortunately forget
the password, you need send it back to your distributor for maintaining the password.
The Push Buttons:
Pressing the button cyclically through all the ports.
KS 104OSD (4 Port)
1 2 3 4
