8
LED Indication:
You can press the button in order like mentioned-above diagram.
When you select one of four PC ports and this PC is shut down or this PC port is disconnected to the PC, the
selected port LED will flash. When you select one of four PCs ports and this PC is powered on, the selected
port LED is lit.
KS 108 (8 Port)
1 2 3 4 5 6 7 8
LED Indication:
You can press the button in order like mentioned-above diagram.
When you select one of eight PC ports and this PC is shut down or this PC port is disconnected to the PC, the
selected port LED will flash. When you select one of eight PCs ports and this PC is powered on, the selected
port LED is lit.
KS 116(16 Port)
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
LED Indication:
You can press the button in order like mentioned-above diagram.
When you select one of sixteen PCs ports and this PC is powered on, the selected port LED is lit. When you
select one of sixteen PC ports and this PC is shut down or disconnected a PC, the selected port LED will
flash.
Keyboard Hot Key Commands:
You can also conveniently command Top-View KVM switch by switching ports through simple key sequences.
To send commands to Top-View KVM switch,
the “SCROLL LOCK” key must be pressed twice within 2
seconds.
You will hear a beep for confirmation and the keyboard is in hot key mode. If you have not pressed
any key in hot key mode within 2 seconds (It means to key in any key follows up “Scroll Lock” “Scroll Lock”
key ), the keyboard will back to under Operation System control state.
Below are the different hot key commands:
within 2 seconds
+ + = Previous Channel
Scroll
Lock
Scroll
Lock