7
AIR BELT SANDER
EN
Translation of the original instructions
1
2
3
1
Press the side button and slightly press the end of the sander to reduce the belt tension. Remove the damaged belt and replace it with a
new one:
Grain 60 (x5) : ref. 060913
Grain 80 (x5) : ref. 060920
Grain 100 (x5) : ref. 060937
2
Press the button on the side of the belt holder to pull and extend the tension bar forward to tighten the belt.
3
Use a 5 mm hexagonal wrench to unscrew counterclockwise to loosen the axis and rotate the head 360°.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
