2
www.topazsystems.com
Right-Angle Strain Relief Cable Installation Guide
Overview
This manual will help you install your right-angle strain relief USB cable. This cable can be used
with model numbers T-LBK750, T-LBK755, T-LBK766, and T-LBK57GC with model suffixes
“-BHSB-R”, “-BBSB-R”, or “-BHSX-R.”
Steps
1. Unplug the signature pad
’s USB cable and remove the cover over the serial port so that
your pad looks like the picture below. Flip your signature pad over and remove the two
screws that are holding the rear vertical pen holder in place. Save these screws to be
used in again in step 4. Place your signature pad with the LCD facing upward.
2. Put the USB cable into the strain relief bracket and plug back into the pad.
