6
Power and Monitor Adjustments
1. Plug the power cord from the middle power connector on the rear of the unit
to an electrical wall outlet.
2. Press the white main power switch to the ON (1) position. It is located near
the LED reading light on the right side of the unit.
3. Press the green standby power switch on the right side of the control panel.
4. Hold the sides of the monitor with both hands and move it up or down to
change the height, or turn the monitor left or right to adjust the angle for the
best view.
Note:
If the monitor does not move to the left or right, make sure to release
the arm lock (push the locking pin in) located at the base of the monitor
arm. Also, make sure that the monitor is raised up so that it freely
moves from left to right.
For arm lock information, refer to
Transporting and Moving the Unit
as
mentioned earlier on page 4.
