background image

ii

 

Freedom Scientific, Inc., 11800 31st Court North, St. Petersburg, Florida 33716-1805, USA 
www.FreedomScientific.com 

© 2016  Freedom Scientific, Inc. All Rights Reserved. TOPAZ

®

 is a trademark of Freedom Scientific, Inc. in the 

United States and other countries. Information in this document is subject to change without notice. No part of 
this publication may be reproduced or transmitted in any form or by any means electronic or mechanical, for any 
purpose, without the express written permission of Freedom Scientific. 

To register your product, visit 

http://www.FreedomScientific.com/Forms/ProductRegistration

.  

Safety and Maintenance 

To keep the unit in good condition and to ensure safe usage, observe the following guidelines: 

 

Do not stare at the operating illumination LED as it may be harmful to the eyes 

 

Power rating: 100-240V~ 1A 47-63Hz 

 

Read the instructions in this user’s guide before attempting to use the unit 

 

Do not attempt to repair the unit or open its case. This product contains no user serviceable parts.  

 

Keep the unit away from wet areas, rain, and other sources of liquids or high humidity. Do not submerge 
the unit. 

 

Always operate the unit in a place where the temperature is between 10° and 40° C (50° and 104° F)  

 

Always store the unit in a place where the temperature is between -20° and 65° C (-4° and 149° F) 

 

Always use the unit on a stable, level, hard surface such as a desk or table  

 

When cleaning the screen, camera lens, or self-view lens, unplug the power cord and apply a small 
amount of non-abrasive cleanser, such as the following, to a soft, lint-free cloth and gently wipe: 

 

Water 

 

Isopropyl alcohol 

 

Petroleum benzene 

 

Vinegar mixed with water at a concentration of no more than 10 percent vinegar, for example, 1.5 
tablespoons of vinegar per cup of water (100 ml per liter) 

CAUTION:

  

Do not apply excessive pressure to the screen, camera, or self-view lens. Do not spray cleanser 
directly on these items. Also, do not use any cleanser that contains the following agents: acetone, 
ethyl alcohol, ethyl acid, ammonia, or methyl chloride. 

When cleaning the rest of the unit, make sure the unit is unplugged. Use a lightly dampened, soft, clean cloth 
with water or mild detergent.  

Summary of Contents for EZ HD

















Reviews: