6
www.topazsystems.com
Topaz LinkSign LCD 1x5 Guide
Signature Pad Base Information
1. Upon receiving and opening the LinkSign box, connect the radio antenna to the
signature pad base by screwing it on until snug. Then, tilt the radio antenna in the
desired direction.
2. Connect the serial cable from the base to your computer; connect the black power
adapter (labeled
“Base Only”) to the base and plug-in.
Base LED Functions
LED
STATUS
CONDITION
Red
Solid
Link is established with the LinkSign.
Yellow
Flashing
Data is being sent, signature in process.
Green
Solid
Power is ON.
