7
www.topazsystems.com
Topaz LinkSign LCD 1x5 Guide
Signature Pad Information
Pad LED Functions
LED
STATUS
CONDITION
Red
Solid
Charging
Red
OFF
Full Battery
Green
Solid
Power ON
Pad Usage & Charging
To charge, plug the signature pad charger
(labeled “Remote Only”) into the back of the
signature pad, and verify that the red
“charging” LED is illuminated. This will turn off when
charging is complete. If the red
“charging” LED flashes or blinks, this indicates that the wrong
power adapter is plugged in. Please use t
he power adapter labeled “Remote Only”. Then,
connect the signature pad.
Charge the signature pad overnight for regular use. Do not charge the pad while in use or
between transactions. A full battery charge (0% to 100%) takes approximately
4 hours
. The
charger shuts off after 5 hours of continuous charging and will not continue to charge the
batteries for an extended period of time if they are already fully charged.
Battery Length
Operation time of the LinkSign LCD 1x5 is 12 hours. This is from 100% charge to 0% charge.
Battery Replacement
Using an incorrect battery type can cause pad failure. Please contact Topaz Tech Support at
for assistance regarding battery replacement.
LinkSign Range
The LinkSign wireless signal is up to 150 feet. Range can be significantly less depending on
your environment, which may include sources of wireless interference such as walls, other
wireless devices, etc.
