4
Laser Safety
Safety Information
AP-L1A/AP-L1AN uses the visible laser beam to track automatically. The AP-L1A/L1AN products
are manufactured and sold in accordance with Radiation Safety of Laser Products, Equipment
Classification, Requirements and User's Guide" (IEC Publication 825) or Performance Standards
for Light-Emitting Products" (FDA/BRH 21 CFR 1040) provided on the safety standards for laser
beam.
As per the said standards, AP-L1A/L1AN is classified as "Class 2 (CLASS
II
) Laser Products".
The laser beam belongs not very dangerous type but we request you to keep and understand
Safety standard for users" as mentioned in the manual instruction.
In case of any failure, do not disassemble the instrument. Contact TOPCON or your TOPCON
dealer.
Caution
Use of controls or adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.
In auto- tracking mode, the laser beam emits from the center of the objective lens.
Do not stare into the objective lens or do not aim at the other people's eyes in the auto-tracking
mode.
Laser beam shutter
The laser beam shutter permits interrupting the laser beam.
The beam mark of the laser beam shutter
: Emitting the laser
: Interrupting the laser
Beam
aperture
Laser beam shutter
Summary of Contents for AP-L1A
Page 1: ...INSTRUCTION MANUAL AUTOMATIC TRACKING TOTAL STATION AP L1A AP L1AN...
Page 14: ...1 NOMENCLATURE AND FUNCTIONS 1 3 2 The details of label will be differed by the market...
Page 82: ...11 SETTING ATMOSPHERIC CORRECTION 11 4 Temprerature C Temprerature F...
Page 83: ...11 SETTING ATMOSPHERIC CORRECTION 11 5 Temprerature F...
