16
2.4 Setting the record mode
In order to save the measurement data in the internal memory of the instrument, the
data saving mode should be set as auto save before leveling measurement. The
default setting is “OFF”.
Flash:
Save the measured data (jobs) into the internal memory
•User can choose “Flash” in “Out Module” of “Condition” Setting if the data needs to
be saved in the flash.
•The maximum storage of memory is about 20,000.
•The maximum number of jobs is 500.
•Folder can not be created in the memory.
SD Card:
The measured data can be saved directly into the SD card.
• User can choose “SD” in “Out Module” of “Condition” Setting if the data needs to be
saved in the SD card.
Communication Port:
Connect DL-201 with external device by cable to receive the real-time measuring data.
User can only use Standard Measurement mode in this condition.
Off:
The measuring data will be displayed without storing and outputting, user can not use
Leveling Measurement mode in this condition.
See next page for the example.
