25
6. Collimate at the staff.
7. Press [MEAS] key.
Measuring for 3 times and
the result will be displayed
for M seconds
※
4
）※
5).
●
If the Measure Mode is
Continuous, press [ESC], the
last measuring result will be
displayed for M seconds.
8. Press [REC] key to save the
result.
※
6).
Input Info 3
[ENT]
[MEAS]
Continuous
[ESC]
[REC]
Measure
Info#3
?
=>1
Measure
Press[MEAS] to meas
Meas#:12
Measure
Rod:
Dist:
N:3 >>>>>>>
Measure 1/2
Rod Ave:0.8263m
Dist Ave:18.818m
N:3
δ
:0.04mm
※
1) The maximum of job name is 8 characters of capital letter or number, and the
maximum of note is 16 characters of lowercase and capital letter, number and
symbols.
※
2) The maximum of point name is 8 characters.
※
3) When the “record mode” is off, the job name, point name and note can not be
inputted.
●
Relationship between measuring number
（
Mn
）
and point name(Pn)is as follow:
Mn 11 Pn 1
Mn 12 Pn 1
Mn 13 Pn 1……
Pn 2
Pn 2
Pn 2
Pn 3
Pn 3
Pn 3
