19-5
19 TOP FIELD MODE
Setting by entering the coordinate data of a occupied point directly
2
Select
{F1}
(SELECT INST PT).
{F1}
3
Select an existing coordinate point with
{F1}
or
{F2}
(Arrow) key, or directly enter a coordinate
point.
Enter/
Select PT#
4
Set with
{ENT}
key.
{ENT}
5
Enter an instrument height.
Enter
instrument
height
6
Set with
{ENT}
key.
Then, the procedure will move onto backsight
setting.
{ENT}
Operating procedure
Operation
Display
1
Select
{F1}
(INST SETUP).
{F1}
2
Select
{F2}
(CREATE INST PT).
{F2}
3
Enter the coordinate point of a occupied point and
its description.
Enter PT#,
Enter
DESC
4
Set with
{ENT}
key.
{ENT}
ENTER INST PT
PT#: [ ]
↑
↓
ALP CLR
ENTER INST PT
PT#: [OCC-PT ]
↑
↓
ALP CLR
ENTER INST HT
INST HT
=0.000_ m
CLR
ENTER INST HT
INST HT
=1.500_ m
CLR
1.SELECT BS PT
2.CREATE BS PT
3.BS DIRECTION
[1] [2] [3]
1.INST SETUP
2.LAYOUT
3.TOPO
[1] [2] [3]
1.SELECT INST PT
2.CREATE INST PT
3.MEAS KNWN PTS
[1] [2] [3]
ENTER NEW POINT:
PT#: [_ ]
DESC: [ ]
ALP CLR
ENTER NEW POINT:
PT#: [OCC ]
DESC: [POINT_ ]
ALP CLR
N [ ]
E [ ]
Z [ ]
ALP CLR
