1-5
1 NOMENCLATURE AND FUNCTIONS
Angle measurement
Distance measurement mode
Coordinate measurement mode
Page
Soft
key
Display
mark
Function
1
{F1}
0SET
Angle of Horizontal is set to 0°00'00"
{F2}
HOLD
Hold the horizontal angle.
{F3}
HSET
Sets a required horizontal angle by entering numerals.
{F4}
P1
↓
The function of soft keys is shown on next page (P2).
2
{F1}
TILT
Setting Tilt Correction
If ON, the display shows tilt correction value.
{F2}
REP
Repetition angle measurement mode
{F3}
V%
Vertical angle percent grade(%) mode
{F4}
P2
↓
The function of soft keys is shown on next page (P3).
3
{F1}
H-BZ
Sets the buzzer sound for every horizontal angle 90°.
{F2}
R/L
Switches R/L rotation of horizontal angle.
{F3}
CMPS
Switches the COMPASS ON/OFF of vertical angle.
{F4}
P3
↓
The function of soft keys is shown on next page (P1).
1
{F1}
MEAS
Start measuring
{F2}
MODE
Sets a measuring mode, Fine/Coarse/Tracking.
{F3}
NP/P
Switches non-prism mode, prism mode or sheet mode.
{F4}
P1
↓
The function of soft keys is shown on next page (P2).
2
{F1}
OFSET Select Off-set measurement mode.
{F2}
S.O
Select stake out measurement mode.
{F3}
S/A
Select set audio mode.
{F4}
P2
↓
The function of soft keys is shown on next page (P3).
3
{F2}
m/f/i
Switches meter, feet or feet and inch unit.
{F4}
P3
↓
The function of soft keys is shown on next page (P1).
1
{F1}
MEAS
Start measuring.
{F2}
MODE
Sets a measuring mode, Fine/Coarse/Tracking.
{F3}
NP/P
Switches non-prism mode, prism mode or sheet mode.
{F4}
P1
↓
The function of soft keys is shown on next page (P2).
2
{F1}
R.HT
Sets a prism height by input values.
{F2}
INSHT
Sets an instrument height by input values.
{F3}
OCC
Sets an instrument coordinate point by input values.
{F4}
P2
↓
The function of soft keys is shown on next page (P3).
3
{F1}
OFSET Select Off-set measurement mode.
{F2}
m/f/i
Switches meter, feet or feet and inch unit.
{F3}
S/A
Select set audio mode.
{F4}
P3
↓
The function of soft keys is shown on next page (P1).
