58
9. STATION SETTINGS
6. Press
to switch the camera to "Tele"
and tap the target at the backsight point.
“Explanation of the buttons” on page 61
The instrument will automatically turn to the
object which will be displayed around the middle
of the screen.
While doing this, the horizontally
rotating part and the turn of the scanner unit will
be locked.
To unlock, turn the horizontally
rotating part or the scanner unit manually.
7. Press [Start], Start/Stop scan key or collimating
position setting key.
• Sometimes “Internal calibration Please wait ...” is
displayed.
• When
is pressed, it will take a while to stop.
Scanning results will be displayed.
8. Press [OK].
The instrument height, the backsight point
name, and the backsight point coordinate will be
stored.