61
10. MEASURING (SCANNING)
2. Press
to switch the camera to "Tele"
and tap the target (pt01).
“Explanation of the buttons” on page 61
The instrument will automatically turn to the object
which will be displayed around the middle of the
screen.
While doing this, the horizontally rotating
part and the turn of the scanner unit will be locked.
To unlock, turn the horizontally rotating part or the
scanner unit manually.
3. Enter “Target name”, “ScnAng”, and “HR”, and
then press [Start], Start/Stop scan key or
collimating position setting key.
Example: Target name
: pt01
ScanAng
: 2°
HR
: 1 m
“Recommended search width setting” on page 63
“Setting the target height” on page 63
• Make sure to select the target (
/
) according to the target object.
Target scanning is in progress.
• Sometimes “Internal calibration Please wait ...” is
displayed.
• When
is pressed, it will take a while to
stop.
Target name
/ : Zoom in or out of the image (Effective only when using the telescopic camera)
When using the
wide-angle camera
When using the
telescopic camera
When using the prism
When using the target sheet
When the laser pointer
is turned ON
When the laser pointer
is turned OFF
switch
Explanation of the buttons