65
10. MEASURING (SCANNING)
Performing 3D range setting scanning
PROCEDURE Perform scanning by setting the scanning range
1. Press the Scan Setting icon.
2. Press .
3. Press
to switch the camera to “Tele”.
“Explanation of the buttons” on page 61
4. Rotate the instrument, tap the top left of the
scanning range on the center of the screen.
While doing this, the horizontally rotating part
and the turn of the scanner unit will be locked.
To unlock, turn the horizontally rotating part or
the scanner unit manually.
5. Confirm the position, and then press [OK].
• When performing scanning indoors or in a dark
place, the collimating position can be confirmed
precisely by turning the laser pointer ON.
6. Rotate the instrument, tap the right bottom of
the scanning range on the center of the screen.
While doing this, the horizontally rotating part
and the turn of the scanner unit will be locked.
To unlock, turn the horizontally rotating part or
the scanner unit manually.
7. Confirm the position, and then press [OK].
The scanning range is determined.
Scan range setting screen