74
11. CHECKS AND ADJUSTMENTS
5. Rotate the instrument horizontally.
• Laser beam does not draw a circle -No adjustment
necessary
• Laser beam draws a circle - The following
adjustment necessary
6. Turn the scanner unit manually and carry out
the rough alignment so that the laser beam
does not draw a circle.
7. Use
to adjust the beam precisely.
While doing this, the turn of the scanner unit will
be locked. To unlock, turn the scanner unit
manually.
8. Press [OK].
Adjusting the laser plummet is complete.
• Press
to turn the laser plummet off, and then the image captured by the camera will be displayed.
• Adjust the instrument carefully since this adjustment might cause an error while measuring the
instrument height.
• When the laser beam keeps drawing a circle even if adjustments are performed many times, a problem
can exist in the instrument. Contact your local dealer.