Backing up Windows CE RAM Data
P/N 7010-0752
3-9
Backing up Windows CE RAM
Data
The Windows CE RAM data stores such items as collected/saved
data, registry information, and installed programs. Performing a
regular backup of this data ensures efficient and continued use of the
GMS-2. RAM data will be lost in the following situations:
• Losing battery power through draining the battery or removing
the battery.
• Performing a hardware reset.
• Upgrading the operating system.
When backing up RAM data, data is stored on the internal flash
memory in a “Backup” directory.
1. On the main screen of the GMS-2, tap
Start
Settings
Control
Panel
System
Backup
.
2. On the RAM Backup tab, tap
RAM data backup
. The backup to
the Flash memory will begin.
• If desired, turn on
Ram data will be backed up before
suspension
to automatically back up RAM data as the GMS-
2 shuts down.
• Leave
Data restoration after hard reset
on to recover data
after a hardware reset. Data is restored after a hard reset and
power cycle.
If desired, turn it off (data will not be restored).
3. When the backup completes, tap
OK
.
Note the following conditions of a backup and restoration cycle:
• If the Flash memory does not have enough space to store a RAM
backup, the backup will be incomplete.
• After upgrading the OS, some items may not be fully restored.
NOTE
The Windows CE RAM has a separate backup,
rechargeable battery. This battery powers the RAM
for five minutes after removing the primary battery.
GMS-2_OM_Book.book Page 9 Friday, December 28, 2007 1:47 PM
Summary of Contents for GMS-2
Page 2: ...ECO 3198 GMS 2_OM_Book book Page 2 Friday December 28 2007 1 47 PM ...
Page 106: ...GMS 2 Operator s Manual Notes Index GMS 2_OM_Book book Page 4 Friday December 28 2007 1 47 PM ...
Page 107: ...Notes Notes ExtraNotes_our fm Page 1 Friday December 28 2007 2 10 PM ...
Page 108: ...Notes Notes ExtraNotes_our fm Page 2 Friday December 28 2007 2 10 PM ...