manualshive.com logo in svg

Topcon GPT-3000 Series, Instruction Manual

The Topcon GPT-3000 Series is a high-quality surveying instrument that offers precision and accuracy. Ensure optimal performance by downloading the free Instruction Manual from our website. Access crucial information on maintenance, operation, and troubleshooting to maximize the capabilities of this advanced tool. Download it from 88.208.23.73:8080.

Share
Download
background image

6   

Contents

FOREWORD  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

General  Handling  Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Display  for  Safe  Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
User. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . 4
Exceptions from Responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Laser Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . 5
Symbol mark while the laser is emitting.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Standard Set Composition  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1  NOMENCLATURE AND FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1

1.1  Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.2  Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-3
1.3  Operating Key  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
1.4  Function Key (Soft Key) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-5
1.5  Star key mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
1.6  Serial signal RS-232C connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-10

2  PREPARATION FOR MEASUREMENT  . . . . . . . . . . . . . . . . . . . . . . . . .  2-1

2.1  Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
2.2  Setting Instrument Up For Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-2
2.3  Power Switch Key ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-3
2.4  Battery Power Remaining Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-4
2.5  Vertical and Horizontal Angle Tilt Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-5
2.6  How to Enter Alphanumeric characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-7
2.7  Point Guide  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-8
2.8  Laser Plummet ON/OFF (Only for Laser Plummet type) . . . . . . . . . . . . . . . . . . . . . . .  2-9

3  ANGLE MEASUREMENT  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1

3.1  Measuring Horizontal Angle Right and Vertical Angle . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
3.2  Switching Horizontal Angle Right/Left  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-2
3.3  Measuring from the Required Horizontal Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-2

3.3.1  Setting by Holding the Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-2
3.3.2  Setting a Horizontal Angle from the Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-3

3.4  Vertical Angle Percent Grade(%) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-3
3.5  Repetition Angle Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-4
3.6  Buzzer Sounding for Horizontal Angle 90°  Increments . . . . . . . . . . . . . . . . . . . . . . . .  3-5
3.7  Compasses ( vertical angle). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-6

4  DISTANCE MEASUREMENT  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1

4.1  Setting of the Atmospheric Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1
4.2  Setting of the Correction for Prism Constant / Non-prism Constant. . . . . . . . . . . . . . .  4-1
4.3  Distance Measurement (Continuous Measurement) . . . . . . . . . . . . . . . . . . . . . . . . . .  4-2
4.4  Distance Measurement (N-time Measurement/Single Measurement) . . . . . . . . . . . . . . . . . . .  4-3
4.5  Fine Mode/Tracking Mode/Coarse Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
4.6  Stake Out (S.O) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
4.7  Offset Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-6

4.7.1  Angle Offset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-7
4.7.2  Distance Offset Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-9
4.7.3  Plane Offset Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-11
4.7.4  Column Offset Measurement  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-13

5  COORDINATE MEASUREMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-1

5.1  Setting Coordinate Values of Occupied Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-1
5.2  Setting Height of the Instrument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-2
5.3  Setting Height of Target (Prism Height) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-2
5.4  Execution of Coordinate Measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-3

6  SPECIAL MODE (Menu Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-1

Summary of Contents for GPT-3000 Series





















































































































































































Reviews:

No comments

Related manuals for GPT-3000 Series

UEi MM100 Instruction Manual preview
MM100
Brand: UEi Pages: 4
Vcheck V2400 User Manual preview
V2400
Brand: Vcheck Pages: 31
Eagletone MM100 User Manual preview
MM100
Brand: Eagletone Pages: 2
GE DigitalFlow GF868 Startup Manual preview
DigitalFlow GF868
Brand: GE Pages: 80
Bacharach 300 Instructions Manual preview
300
Brand: Bacharach Pages: 87
Dallas Brass WindMaster Instructions Manual preview
WindMaster
Brand: Dallas Brass Pages: 19
DAVIS 6415 User Manual preview
6415
Brand: DAVIS Pages: 12
Sensia NUFLO TMP-100 User Manual preview
NUFLO TMP-100
Brand: Sensia Pages: 16
X-Rite RM200QC User Manual preview
RM200QC
Brand: X-Rite Pages: 45
X-Rite i1Pro Quick Start Manual preview
i1Pro
Brand: X-Rite Pages: 22
Shimpo DT209X Instruction Manual preview
DT209X
Brand: Shimpo Pages: 68
ESP LTD KH-602 Owner'S Manual & Warranty Information preview
LTD KH-602
Brand: ESP Pages: 12
semaphore KINGFISHER PLUS+ Hardware Reference Manual preview
KINGFISHER PLUS+
Brand: semaphore Pages: 247
POSEIDON Pegasus Deluxe Installation And Maintenance Manual preview
Pegasus Deluxe
Brand: POSEIDON Pages: 21
R&S DVMS1 Getting Started preview
DVMS1
Brand: R&S Pages: 60
Dranetz PowerGuide 4400 User Manual preview
PowerGuide 4400
Brand: Dranetz Pages: 277
Mid-West Model 220 Installation And Maintenance Instruction preview
Model 220
Brand: Mid-West Pages: 14
4iiii Podiiiium User Manual preview
Podiiiium
Brand: 4iiii Pages: 35

Brands by name

Popular brands

Load more brands