47
BASIC OPERATIONS
4
All the measurement values for right and left eyes are cleared, and the main body will
return to the initial power on position.
When measurement values are cleared by the ALL CLEAR button , the patient
ID may reset, depending on the setting of "RESETTING THE PATIENT ID
(PATIENT ID RESET)" (page 117).
When "Resetting the Patient ID" is "ON":
• The patient ID is reset to the initial patient ID set by "Setting the Patient ID"
of "Initial Setting."
When "Resetting the Patient ID" is "OFF":
• The patient ID is not reset, and the same patient ID is used.
When measurement values are outputted by the PRINT button , the data will be
cleared when starting the measurement of the next patient.
TERMINATING MEASUREMENT
1
Turn off the POWER switch of main body.
When external devices are connected to external I/O terminals, turn off the power
of these devices too.
When the instrument is not used for a long period, unplug the power supply cable,
and detach any cables connected to the external I/O terminal.
2
Clean the forehead rest and the chinrest, then cover the instrument with a dust cover.
When chinrest papers are used, remove the top sheet of chinrest paper to allow
for a clean sheet for the next patient.
Summary of Contents for KR-1W
Page 1: ...INSTRUCTION MANUAL WAVE FRONT ANALYZER KR 1W ...
Page 2: ......
Page 186: ......
Page 188: ...KR 1W WAVE FRONT ANALYZER 41835 97992 Printed in Japan 2010 02 100LW2 ...
