11
Key or Lamp
Function
Battery power
remaining lamp
Indicates the amount of battery power remaining.
(That lamp will automatically go off after approximately a minute. It will go
back on if any key is pressed.)
Channel
selecting lamp
Indicates the selected channel.
Manual mode
lamp
Lights up when the manual mode is in use.
Manual mode key
When pressed twice, initiates the manual mode.
When pressed once in the manual mode, cancels the manual mode.
Bluetooth
communication
lamp
Blinks during communication with Bluetooth.
(The lamp functions only for Bluetooth built-in model.)
Power lamp
Blinks during auto-leveling, and lights up steadily when auto-leveling ends.
Power switch
Turns on the power.
When pressed for 2 seconds or more, turns off the power.
Channel
selecting key
The channel can be changed by pressing the channel selecting key within 5
seconds after the power goes on (while the channel lamp is blinking).
The channels change in order: 1
→
2
→
3
→
1.
Each time the channel selecting key is pressed, the operable time of the keys
is extended by 5 seconds.
The selected channel is set 5 seconds after the channel selecting key is re-
leased.
Plumb beam key
This button switches the plumb beam on and off.
(That beam will automatically go off after five minutes. )
Summary of Contents for LAZER ZONE PZL-1
