13
Battery Power Remaining Lamp
The battery power remaining lamp will be shown for several minutes when the instrument is
powered on or when the battery level changes.
The battery power remaining lamp will be shown again when any key is pressed.
Turning Auto-leveling Off
To turn off the auto-leveling function (manual mode), press the manual mode key twice in
quick succession. The manual mode light will illuminate. The instrument can be positioned in
any direction, the laser beam remains on and the head will rotate.
IMPORTANT:
In manual mode, the laser beam will not shut off if disturbed!
To return to Auto-leveling mode, press the manual mode key once.
Battery is sufficient.
Dead batteries. Recharge the battery or replace the dry batteries with new
ones.(The laser will turn completely off after blinking for about five minutes.)
NOTE:
Even if an AC/DC converter is connected at this time, blinking still continues.
Once the power is turned off, the battery remaining display will reset.
Continuous
Blinking
Blinking order
The power is low, but laser is still usable.
(Blinking continues until batteries are dead.)
Summary of Contents for LAZER ZONE PZL-1
