14
Operation
1
Set up the instrument on a flat surface or a tripod. At this time, the instrument will perform
auto-leveling in a range of ±
3
°.
2
Turn on the power, then select a channel with the channel selecting key.
(Press the channel selecting key within 5 seconds after the power goes on.)
After auto-leveling ends, the head will rotate and the laser will go on.
For other operations, and for setting the instrument constant, see the instruction manual
for the controller.
Using Plumb Beam
You can set the instrument using with the plumb beam for centering.
Press the plumb beam key to emit the plumb beam.
The plumb beam is equipped with an auto cut-off function.
Plumb beam
When the instrument performs auto-leveling, the
plumb beam blinks.
Set up the instrument when the beam is emitted.
Summary of Contents for LAZER ZONE PZL-1
