3. Various Settings
70
3.2.14 Maintenance Recommended Message
The maintenance recommended message is displayed one year after buying the BM-5AC or after
one year has elapsed since calibration conducted by Topcon factory.
Display method
☞
"3.1.2 Displaying Data/Setting Items"
ON
:
A buzzer sounds and the display does not advance to the next screen until a switch
is pressed.
OFF :
The message is displayed, however, the buzzer does not sound and the display can
advance to the next screen.
The following describes the procedure for changing the maintenance recommended message
setting.
1
Press the [CHANGE] switch.
2
Press the [ROTATION] switch and select the setting.
Each press switches the ON/OFF setting.
3
After you have selected the setting, press the [ENTER] switch.
3.2.15 Color Adjustment
Use this when measurement should be done on condition that priority is given to the correlativity
with the old models (BM-5A, BM-5AS).
Display method
☞
"3.1.2 Displaying Data/Setting Items"
ON
:
Enable the color adjustment function. (Initial setting).
OFF :
Disable the color adjustment function.
Set this when you want to prioritize the correlation with the old model.
･
This function does not warrant the enhancement of the correlativity with the old models.
･
When this function is OFF (invalid), the chromaticity accuracy is equal to the old models.
The following describes the procedure for changing the color adjustment setting.
1
Press the [CHANGE] switch.
2
Press the [ROTATION] switch and select the setting.
Each press switches the ON/OFF setting.
3
After you have selected the setting, press the [ENTER] switch.
*
M A I N T E N A N C E
F
D I S P L A Y
B A U D X 2 A T R A N G E 0 3 . 3 3 0 0
L E N G C H Y B
O
-
N
A S 2 R Y O D D *
S T O P Z B I T R A N G E S 3 P A G E 2
C O L O R A D J U S T M E N T
B A U D T R A T E = 3 8 4 0 0 E - 0 1 *
L E N G C H Y
O N
S T O P T B I T S = 1 8 4 0 0 E - 0 1 *
Memo
