MC-
X
1 Connectivity and Configuration
Factory Reset for the GR-i3 via TRU
17
Excavator Indicate System
P/N: 1022461-01
Factory Reset for the GR-i3 via TRU
A Factory Reset resets all the receiver parameters to their default values and clears the receiver's Non-
Volatile Random Access Memory (NVRAM). NVRAM holds data required for satellite tracking. Factory
Reset does not delete any files from the receiver and does not reset modem parameters.
Perform a Factory Reset after loading a new GNSS firmware file and sometimes to eliminate
communication or tracking problems. After performing the procedure, the receiver requires some time
to collect new ephemerids and almanacs (up to 15 minutes)
To perform a Factory Reset using Topcon Receiver Utility (TRU):
1. Open
TRU
from the desktop of the GX Series display.
2. Tap
Device > Application Mode > Receiver Managing
.
Figure 30. TRU - Receiver Managing
3. Tap
Device > Connect
.
