MC-
X
1 Connectivity and Configuration
Factory Reset for the GR-i3 via TRU
18
Excavator Indicate System
P/N: 1022461-01
Figure 31. TRU - Connect
4. In the
Connection Parameters
screen, select
Network
from the
Connect Using
drop-down
list.
5. In the
Device Name
field, tap
to select the device name to which the GPS receiver board is
connected.
a. If a Device name has not been configured, tap
. Then press and hold on the white
area of the screen.
b. Select
Add
. The
Network Connection
screen appears.
c. Enter a
Name
to identify the Main GNSS board
d. Enter the following network parameters for the GR-i3 Main GPS board:
– IP Address or Host Name:
192.168.0.1
– TCP Port:
8012
– Password:
TPS
e. Tap
Ok
.
MC-i3, MC-i4, and the GR-i3 utilize the same network parameters for Main and AUX
GNSS boards.
