Machine Measur
ements and Configuration
Entering Sensor Information
41
Excavator Indicate System
P/N: 1022461-01
6. Tap
Next
to access the
Excavator Hitch
screen.
Figure 53: Select Bucket Sensor ID
7. Enter the appropriate values, and select corresponding sensor.
8. Tap
Next
to access the
Excavator Attachments
screen.
a. Tap
New
to access the
Excavator Attachment Setup
screen.
b. Enter or select the appropriate data as needed.
Figure 54: Excavator Attachments
c. Press
Next
to access the
Calibrate Attachment Angle
screen (calibration performed
in next chapter).
d. Press
Next
to access the
Calibrate Bucket Base
screen (calibration performed in next
chapter).
e. Press
Finish
to access the
Excavator Attachments
screen.
f. Repeat Steps a through e for each attachment.
