background image

Indicator

Height alert warning of 
rotating laser

A flash and a buzzer sound signifies 
that the height alert function of rotating 
laser is operating.
(This function is not usable to the rotat-
ing laser which does not have the height 
alert and the function to output alarm 
signal.)

Rotating laser battery warning

A flash shows that the rotating laser power 
is low.
(This function is not usable to the rotating 
laser which does not have the function to 
output alarm signal.)

Higher than datum position

Move the sensor downward.
(Buzzer sound:High frequent beep sound)

Datum position (ON GRADE position)

(Buzzer sound:Continuous beep sound)

Lower than datum position

Move the sensor upward.
(Buzzer sound:Low frequent beep sound)

Battery remaining display

Indicates the battery remaining of remote display as follows.

Flashing alternately

Battery is sufficient.

The power is low, but remote display is still usable.

Dead battery. 
Replace the dry battery with new one.

Mode1

Mode2

Mode3

Mode4 (Blinking)

Precision mode

Indicator(LED)

Flashes slowly

Auto-cut off function

The power will be turned off automatically after not communicating with LS-B110W/LS-B10W for more 
than approx. 5 minutes.
 (To turn on the power, press the power switch again.)

Laser beam positions and display patterns

During communication with LS-B110W

Mode1:±3mm

Mode2:±6m

m

Mode3:±15mm

Mode4:±30mm

±15mm/±0.05ft

(30mm/0.1ft width)

When the laser beam is off 

to the top or to the bottom

No display when in Mode 3 and 4

No display when in Mode 4

Flashes slowly

Indicator(LCD)

Indicator(LED)

±30mm/±0.1ft

(60mm/0.2ft width)

±50mm/±0.16ft

(100mm/0.33ft width)

±70mm/±0.23ft

(140mm/0.46ft width)

Detective 
precision

Flashes quickly

Flashes more slowly

±125mm/±0.41ft

(250mm/0.82ft width)

Laser beam positions and display patterns

During communication with LS-B10W

Indicator(LCD)

Indicator(LED)

Detective 
precision

Flashes quickly

Flashes slowly

Flashes more slowly

When the laser beam is off 

to the top or to the bottom

Mode1:±2mm

Mode2:±6m

m

Mode3:±12mm

Mode4:±30mm

±15mm/±0.05ft

(30mm/0.1ft width)

±25mm/±0.08ft

(50mm/0.16ft width)

±35mm/±0.11ft

(70mm/0.23ft width)

±60mm/±0.2ft

(120mm/0.39ft width)

No display when in Mode 4

No display when in Mode 4

Reviews: