5. BASIC OPERATION
20
(Method 2)
1. Select
[EDM]
in the first page of Measure mode
or "EDM" in Config mode/Configuration mode.
2. Move to "Reflector" using
{
O
}
/
{
G
}
/
{TAB}
.
3. Switch between Prism, Sheet, and N-Prism using
{
K
}/{
L
}
.
4. Press
{ENT}
to confirm selection.
Screens can be selected/operated using the keys on the keyboard or the touch panel. The touch panel
can be operated using either the stylus pen provided or your fingers.
It is also possible to de-activate the touch panel temporarily.
C
G
• Do not scratch the display or use any sharp implement other than the stylus pen to operate the touch
panel.
Using the stylus
The stylus pen can be used to select menus and buttons on the screen and operate the scroll bar. The
touch panel supports "tap", "double tap", and "drag" operations.
5.2
Display Functions
Operation
Method
Tap
Lightly tap the display once. This operation is equivalent to the clicking of a
mouse button when using a computer.
Double tap
Lightly tap the display twice on the same point.This operation is equivalent
to the "double-click" for a computer mouse.
Drag
Lightly apply the point of the stylus pen to the display and move in the
desired direction, maintaining contact between the stylus and display all
the time.
