- 54 -
■
Input of correction factors (XYZ)
Input the correction factors. The data for X, Y and Z are inputted.
1
Switch to the function mode to display the [FACTOR]-
[X Y Z factor].
☞
'3.1.2 Entering/Returning from the Function Mode'
If “Factor (XYZ) =” is set to OFF, this setting screen is not displayed.
2
To input data, press the [CHANGE] switch. Here, input data to "X". The data in the position to
be inputted disappears and its head is lit.
＊
X Y Z
Ｆａｃｔｏｒ
＊
Ｘ＝
Ｙ＝
１．０００Ｅ＋００
Ｚ＝
１．０００Ｅ＋００
3
Input the desirable value with the method of setting value.
Setting Method
☞
‘3.1.3 Setting Values’
＊
X Y Z
Ｆａｃｔｏｒ
＊
Ｘ＝
２．００
Ｙ＝
１．０００Ｅ＋００
Ｚ＝
１．０００Ｅ＋００
4
After inputting the value, press the [ENTER] switch to decide the value.
The Y data in the position to be inputted disappears and its head blinks.
＊
Ｆａｃｔｏｒ
ＯＮ／ＯＦＦ
＊
Ｘ＝
２．０００Ｅ＋００
Ｙ＝
Ｚ＝
１．０００Ｅ＋００
5
To set the correction factor for X, Y and Z value, perform Step 3 and 4 repeatedly.
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
Note
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
