EN
4
5
General Information of OBDII (On-Board
Diagnostics II)
Diagnostic Trouble Codes (DTCs)
The OBDII system is designed to monitor emission control systems and key
engine components by performing either continuous or periodic tests of specific
components and vehicle conditions, which will offer three pieces of such valuable
information:
•
Whether the Malfunction Indicator Light (MIL) is commanded “on” or “off”;
•
Which, if any, Diagnostic Trouble Codes (DTCs) are stored;
•
Readiness Monitor status.
Product Descriptions
To connect to the diagnostic cable.
Show test results.
To connect the scanner to computer via USB cable for
upgrade, and printing.
To read or write the data/file stored in the TF card.
1
2
3
4
TF Card Slot
DB-15 Diagnostic
Connector
LCD
USB Port
Name
NO.
Descriptions
1
2
3
4
5
6
7
8
9
10
11
13
12
Notice
ArtiLink600 may automatically reset while being disturbed by strong static
electricity. THIS IS A NORMAL REACTION.
This Product Manual is subject to change without written notice.
Read the instruction carefully and use the unit properly before operating. Fail
to do so may cause damage and/or personal injury, which will void the product
warranty.