TE-F360 User Manual
© TOPE All Rights Reserved.
25
Test Flight
Remote controller can control aircraft independently. However, it is better to connect with APP to get more flight
data.
Takeoff/Landing Procedures
1. Place the aircraft in an open, flat area with the Aircraft Status Indicator facing towards you.
2. Turn on the aircraft and the remote controller.
3. Turn on intelligent flight battery to connect remote controller and aircraft.
4. Launch the TOPEUAV App and enter Camera View after mobile connects Wi-Fi of TE-F360 aircraft.
5. Wait until the Aircraft Status Indicator blinks green slowly indicating that it is now safe to fly with
the following methods:
Manual Takeoff
a.
A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the
bottom inner or outer corners to start the motors. Once the motors have started spinning,
release both sticks simultaneously.
OR
b.
Pull throttle slowly to the aircraft to rise.
Auto Takeoff
The aircraft can takeoff automatically using TOPEUAV APP or by remote controller.
Auto takeoff in TOPEUAV APP:
Tap
icon, motor starts automatically and aircraft takes off and hovers at 2 meters above
ground
.
Auto takeoff by remote controller:
Three short presses on power button, motor starts automatically and aircraft takes off and hovers
at 2 meters above ground.
6. Landing: including manual landing and auto landing.
Manual landing:
Push throttle stick down, and the aircraft will land slowly. When the aircraft has landed, push and
hold the throttle stick down. The motors will stop after a few seconds.
