TE-F360 User Manual
© TOPE All Rights Reserved.
7
Aircraft Status Indicator States
Return to Home
The Return to Home (RTH) function brings the aircraft back to the last recorded Home Point. There are three types of
RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three scenarios in detail.
GPS
Description
Home Point
If a strong GPS signal was acquired before takeoff, the Home Point is the
location from which the aircraft launched. The GPS signal strength is indicated by
the GPS icon (
). The Aircraft Status Indicator will blink
green quickly when the Home Point is recorded.
Smart RTH
1.
If the GPS signal is sufficiently strong, Smart RTH can be used to bring the aircraft back to the Home Point.
Smart RTH is initiated either by tapping
in the TOPEUAV App
2.
Smart RTH can be used by pressing the RTH button on the remote controller.
Exit Smart RTH
Remote controller can exit Smart RTH with the following operations:
Push to lowest grade if the switch on controller is not in lowest grade, then push to middle or highest
grade, user can re-control the aircraft once exiting Smart RTH. Users can also use left/right joystick
to control, which indicates Smart RTH exit.
Low Battery RTH
Low Battery RTH is triggered when the Intelligent Flight Battery is depleted to a point that may affect the safe return of
the aircraft. Return home immediately or land the aircraft when prompted. TE-F360 will display a warning when a
low battery level warning is triggered. The aircraft will automatically return to the Home Point with fast red
indicator flashing. The user can cancel the RTH procedure by pressing the RTH button or Flight Pause button
on the remote controller, which indicates Smart RTH exit.
Once low battery warning light flashes, the aircraft will land automatically, which can
’t cancelled. During
the landing, it is supported to control aircraft flight with remote controller.
