TE-F360 User Manual
© TOPE All Rights Reserved.
10
1. Battery Level Display: The LED indicators display the current battery level.
2. Balanced Charging: The voltages of the battery cells are automatically balanced during charging.
3. Overcharge Protection: Charging automatically stops when the battery is fully charged.
4. Over-discharge Protection: Discharging stops automatically to prevent excessive discharge.
Refer to the
TOPE Intelligent Flight Battery Safety Guidelines
before use. Users take full
responsibility for all operations and usage.
Using the Battery
Press the Power button once, then press again and hold for 3 seconds to turn the battery on or off.
Low Temperature Notice
1. Battery capacity is significantly reduced when flying in low temperature (0° to 5° C) environments.
2. Batteries cannot be used in extremely low temperature (0° C) environments.
3. To ensure optimal performance of the battery, keep the battery temperature above 5° C, 20° C is
recommended.
Checking Battery Level
The battery level LEDs on the battery display how much charge remains. If the battery is turned off, press the Power button
once and the battery level LEDs will light up to display the current battery level.
Charging the Battery
The Intelligent Flight Battery must be fully charged before using it for the first time:
1. Connect the USB power adapter to a power source (DC5V 2~4A), at this moment, charger indicator
will flash.
2. Attach the Intelligent Flight Battery to the USB power adapter
3. The battery level LEDs light up solid during charging.
4. The Intelligent Flight Battery is fully charged when the battery level LEDs will flash, which takes about 3-5
hours. Detach the AC power adapter when the battery is full charged.
Detaching the Battery
Pull the battery buckles and remove the battery from the aircraft
Camera
